Question 1

Which of the following best describes the primary distinction between a Demand Deposit and a Term Deposit in the context of banking regulation?

Accepted Answer

Demand deposits are withdrawable on demand without notice or penalty, while term deposits have a fixed maturity period and cannot be withdrawn before maturity without incurring a penalty. Under the Banking Regulation Act, 1949, banks classify liabilities into these two categories for reserve requirement calculations (NDTL — Net Demand and Time Liabilities). Demand deposits include current accounts and savings accounts (with certain withdrawal restrictions), whereas term deposits include fixed deposits with predetermined tenure. The distinction is critical for calculating CRR and SLR requirements. The trap here is confusing 'demand' with 'current account only' — savings accounts are also demand deposits despite having some withdrawal limits.

Question 2

Under RBI guidelines, what is the primary purpose of maintaining a Statutory Liquidity Ratio (SLR) by commercial banks?

Accepted Answer

The Statutory Liquidity Ratio (SLR) is prescribed by RBI under Section 24 of the Banking Regulation Act, 1949, to ensure that banks maintain a minimum percentage of their Net Demand and Time Liabilities (NDTL) in the form of liquid assets — primarily government securities, gold, and cash. The primary purpose is to ensure banking system stability, control credit expansion, and provide a safety cushion for depositors. SLR is distinct from CRR (Cash Reserve Ratio), which is cash deposited with RBI. Banks maintain SLR assets themselves, not with RBI. The current SLR requirement is 18% of NDTL (as of 2024), though this is subject to RBI policy changes. The trap is confusing SLR with CRR or misunderstanding where these assets are held.

Question 3

A customer takes a home loan of ₹50 lakhs from a bank at 8% per annum. After 2 years, the RBI reduces the repo rate by 100 basis points. Which of the following statements is most accurate regarding the impact on the customer's loan?

Accepted Answer

When the RBI reduces the repo rate, banks' cost of funds decreases, which typically leads to a reduction in lending rates. However, the actual impact on the customer's existing loan depends on the loan agreement structure. If the loan is at a fixed rate, the customer's EMI remains unchanged despite the repo rate cut. If the loan is linked to an external benchmark (such as the RBI Repo Rate under the MCLR or EBLR framework mandated by RBI in 2016), the loan rate will adjust downward, reducing the customer's EMI or loan tenure. Most home loans in India are now linked to external benchmarks post-RBI's 2016 directive on MCLR (Marginal Cost of Funds Based Lending Rate). The trap is assuming all loans automatically benefit from repo rate cuts, when in fact fixed-rate loans do not.

Question 4

Which of the following is NOT a component of Net Demand and Time Liabilities (NDTL) as defined by RBI for the purpose of calculating reserve requirements?

Accepted Answer

Net Demand and Time Liabilities (NDTL) is the sum of all deposits (demand and term) minus certain exclusions. NDTL includes: (1) Current accounts, (2) Savings accounts, (3) Fixed deposits, (4) Recurring deposits, (5) Money at call and short notice, and (6) Other deposits. NDTL excludes: (1) Inter-bank deposits, (2) Deposits from RBI, (3) Deposits from government, (4) Deposits held as margin for derivatives, and (5) Deposits against letters of credit. The purpose of NDTL is to calculate the base for CRR and SLR requirements. The trap is including items that are explicitly excluded from NDTL, such as inter-bank deposits or RBI deposits.

Question 5

Under RBI guidelines, which of the following best describes the relationship between the Marginal Cost of Funds Based Lending Rate (MCLR) and the Prime Lending Rate (PLR) in the context of loan pricing?

Accepted Answer

In 2016, RBI replaced the Prime Lending Rate (PLR) system with the Marginal Cost of Funds Based Lending Rate (MCLR) through a circular mandating that banks link their lending rates to MCLR for new loans. MCLR is calculated based on the marginal cost of funds (the cost of the last rupee borrowed by the bank) plus a spread. MCLR is more transparent and responsive to monetary policy changes than the older PLR system. PLR was a fixed rate set by each bank and was not directly linked to RBI's policy rates, making monetary policy transmission ineffective. The transition from PLR to MCLR was designed to improve transmission of RBI's monetary policy decisions to borrowers. The trap is confusing the two systems or assuming they operate simultaneously.

Question 6

Under the Banking Regulation Act, 1949, which of the following best describes the Statutory Liquidity Ratio (SLR) that banks must maintain?

Accepted Answer

SLR (Statutory Liquidity Ratio) is the minimum percentage of a bank's Net Demand and Time Liabilities (NDTL) that must be maintained in the form of liquid assets — primarily government securities, gold, or cash. This is prescribed by RBI under Section 24 of the Banking Regulation Act, 1949. The key distinction is that SLR assets are held by the bank itself, whereas CRR (Cash Reserve Ratio) is deposited with RBI. Therefore, answer is B.

Question 7

Which of the following correctly describes the relationship between a bank's Repo Rate and Reverse Repo Rate in the RBI's monetary policy framework?

Accepted Answer

The Repo Rate is the rate at which RBI lends to banks against government securities as collateral. The Reverse Repo Rate is the rate at which RBI borrows from banks (or equivalently, the rate at which banks lend to RBI). By definition, the Reverse Repo Rate is always lower than the Repo Rate, as it represents the floor of the RBI's corridor. The Repo Rate serves as the primary policy rate and is used to transmit monetary policy. Therefore, answer is C.

Question 8

A bank customer deposits ₹50 lakhs in a Fixed Deposit (FD) account. Under the Deposit Insurance and Credit Guarantee Corporation (DICGC) scheme, what is the maximum amount of insurance coverage available for this deposit?

Accepted Answer

The DICGC scheme, administered by RBI, provides deposit insurance coverage up to ₹5 lakhs per depositor per bank. This limit applies to the aggregate of all deposits (savings, current, fixed, recurring, etc.) held by a single depositor in a single bank. In this case, the customer's ₹50 lakh FD would be covered only up to ₹5 lakhs, leaving ₹45 lakhs uninsured. Therefore, answer is B.

Question 9

Which of the following statements correctly describes the difference between a Demand Loan and a Term Loan in retail banking?

Accepted Answer

A Demand Loan is a loan that can be called back (recalled) by the lender at any time without prior notice or at short notice, and the borrower must repay on demand. A Term Loan, by contrast, has a fixed repayment schedule with a predetermined tenure (e.g., 3 years, 5 years, 10 years). The borrower is not obligated to repay before the agreed term unless specified. Term Loans are more common in retail banking for mortgages, auto loans, and personal loans. Therefore, answer is D.

Question 10

Under RBI guidelines, what is the primary purpose of the Loan-to-Value (LTV) ratio requirement in home loan lending?

Accepted Answer

The Loan-to-Value (LTV) ratio is the ratio of the loan amount to the market value of the property offered as collateral. RBI prescribes maximum LTV ratios to ensure that banks do not lend excessively against the collateral value. The primary purpose is to protect the bank's interest by ensuring adequate collateral coverage in case of default and property value depreciation. A lower LTV (e.g., 80%) means the borrower must contribute more equity, reducing the bank's risk. This is a prudential regulation under RBI's risk management framework. Therefore, answer is A.

Question 11

Under the Banking Regulation Act, 1949, which of the following best describes the primary distinction between a Demand Deposit and a Term Deposit in the context of bank liability classification?

Accepted Answer

Demand Deposits are withdrawable by the depositor on demand without any notice or penalty, whereas Term Deposits (also called Fixed Deposits) are accepted by banks for a fixed tenure and can only be withdrawn after the maturity period or with penalty if withdrawn prematurely. This distinction is critical for banks in classifying their liabilities and calculating statutory ratios like CRR and SLR. The Banking Regulation Act, 1949 and RBI guidelines on deposit classification require banks to maintain separate accounting for these two categories. Therefore, answer is B.

Question 12

A bank customer avails a Home Loan of ₹50 lakhs at 8.5% per annum with a 20-year tenure. Under RBI's Lending Code and consumer protection norms, which of the following is NOT a mandatory disclosure requirement by the bank to the borrower before loan sanction?

Accepted Answer

RBI's Fair Lending Code and guidelines on transparency in lending (issued vide RBI Master Circular on Lending) mandate that banks must disclose: (1) the rate of interest and method of calculation, (2) processing fees and other charges, (3) prepayment terms and penalties, (4) EMI amount and repayment schedule, (5) grievance redressal mechanism, and (6) the total cost of credit. However, the bank is NOT mandatorily required to disclose the borrower's credit score or internal credit rating, as this is proprietary information and not part of the standardized disclosure framework. The bank must disclose only the final approved rate and terms, not the internal scoring methodology. Therefore, answer is D.

Question 13

A bank grants a housing loan to a borrower at a floating rate linked to the Marginal Cost of Funds Based Lending Rate (MCLR). If the MCLR is 6.5% and the bank adds a spread of 0.75%, what is the loan rate? Additionally, if the RBI's Repo Rate is 6.5%, what is the relationship between MCLR and Repo Rate in this scenario?

Accepted Answer

The loan rate is calculated as MCLR + Spread = 6.5% + 0.75% = 7.25%. Regarding the relationship: MCLR is the minimum rate at which a bank can lend to customers, and it is typically higher than or equal to the Repo Rate. In this scenario, MCLR (6.5%) equals the Repo Rate (6.5%), which is unusual but possible during specific monetary policy phases. However, under normal circumstances, MCLR is set above the Repo Rate because banks factor in their marginal cost of funds (cost of deposits, borrowings, and capital) plus a margin. MCLR was introduced by RBI in April 2016 via the RBI Monetary Policy Framework to replace the Base Rate system and ensure better transmission of monetary policy. The spread (0.75%) is the bank's profit margin and risk premium. Therefore, the answer is B.

Question 14

A Non-Resident External (NRE) account holder deposits foreign currency earnings in their NRE savings account. Which of the following statements is INCORRECT regarding NRE deposits?

Accepted Answer

NRE (Non-Resident External) accounts are specifically designed for Non-Resident Indians (NRIs) and Persons of Indian Origin (PIOs) to deposit foreign currency earnings. Key features of NRE accounts include: (1) deposits are in foreign currency and are fully repatriable, (2) interest earned is taxable in India, (3) the account is freely transferable to another NRI, and (4) there is no restriction on repatriation of principal and interest. The INCORRECT statement among typical options would be one claiming that NRE interest is not taxable in India or that repatriation is restricted. NRE accounts are governed by the Foreign Exchange Management Act (FEMA), 1999, and RBI's Liberalized Remittance Scheme (LRS) guidelines. Therefore, the answer is D.

Question 15

A bank customer avails a loan against securities (LAS) by pledging listed equity shares worth ₹10 lakhs. The bank applies a Loan-to-Value (LTV) ratio of 50%. What is the maximum loan amount the customer can obtain, and which RBI regulation governs such lending?

Accepted Answer

The maximum loan amount = Securities Value × LTV Ratio = ₹10 lakhs × 50% = ₹5 lakhs. Loans against securities are governed by RBI's Master Direction on Lending Against Securities (LAS), which prescribes prudential norms including LTV ratios, margin requirements, and valuation standards. The LTV ratio of 50% means the bank will lend only 50% of the market value of the pledged securities, retaining a 50% margin for safety. This margin protects the bank against market volatility and ensures that even if the security value declines, the loan remains adequately secured. RBI also mandates daily mark-to-market valuation of pledged securities and specifies that banks must maintain appropriate haircuts based on the type of security. Therefore, the answer is B.

Question 16

Under Basel III framework, a Scheduled Commercial Bank must maintain a minimum Common Equity Tier 1 (CET1) capital ratio of what percentage of Risk-Weighted Assets (RWA)?

Accepted Answer

Basel III, implemented by RBI through various circulars and the Master Direction on Capital Adequacy Framework, mandates a minimum CET1 ratio of 5.5% of RWA. This is the highest quality capital component and forms the foundation of a bank's capital structure. CET1 includes common shares, retained earnings, and other qualifying instruments. The total Tier 1 capital requirement is 7% (CET1 5.5% + Additional Tier 1 1.5%), and the overall CRAR (Capital to Risk-Weighted Assets Ratio) must be minimum 9%. The trap here is confusing CET1 with total Tier 1 or overall CRAR — candidates often remember 9% (total CRAR) and select that instead of 5.5% (CET1 specifically). Therefore, answer is A.

Question 17

A bank offers a Fixed Deposit (FD) with a tenure of 18 months at 6.5% per annum. The depositor chooses the 'Cumulative' option. Under which provision of the Banking Regulation Act, 1949, is the bank required to disclose the maturity amount and interest calculation method to the depositor?

Accepted Answer

The Banking Regulation Act, 1949, Section 45-L specifically mandates that banks must disclose to depositors the rate of interest, the period for which the deposit is accepted, and the maturity amount before accepting a deposit. This section ensures transparency in deposit products. For cumulative deposits, the maturity amount includes compounded interest. RBI's Master Direction on Deposits (2016) further reinforces this requirement and mandates that banks provide a deposit receipt clearly stating the maturity value. The trap here is confusing Section 45-L (deposit disclosure) with Section 45-ZA (deposit insurance limit) or other sections of the Act. Therefore, answer is B.

Question 18

A bank grants a term loan of ₹50 lakhs to a manufacturing unit. Under RBI's Prompt Corrective Action (PCA) framework, if the bank's Capital to Risk-Weighted Assets Ratio (CRAR) falls below a certain threshold, the bank must classify this loan under a specific NPA category within a defined timeline. What is the mandatory NPA classification timeline for such loans when a bank is under PCA?

Accepted Answer

Under RBI's Prompt Corrective Action (PCA) framework, when a bank is placed under PCA due to capital inadequacy or asset quality deterioration, the NPA classification timeline becomes stricter. Specifically, loans must be classified as NPA if they remain overdue for 90 days or more (standard NPA rule), but under PCA, RBI may impose additional restrictions. However, the baseline NPA classification rule remains 90 days of non-payment for term loans. The trap here is that candidates may confuse PCA-specific timelines with the standard 90-day rule, or incorrectly assume PCA mandates a shorter timeline like 60 days. The correct answer is that the standard 90-day NPA classification rule applies, but PCA may impose stricter provisioning and other compliance measures. Therefore, answer is C.

Question 19

A bank customer deposits ₹8 lakhs in a Fixed Deposit account. Under the Deposit Insurance and Credit Guarantee Corporation (DICGC) scheme, what is the maximum amount of insurance coverage the depositor will receive if the bank fails?

Accepted Answer

The Deposit Insurance and Credit Guarantee Corporation (DICGC), a subsidiary of RBI, provides deposit insurance coverage up to ₹5 lakhs per depositor per bank. This limit has been in effect since 2020 (increased from ₹1 lakh in 1993). The coverage is per depositor per bank, meaning if a customer has deposits in multiple banks, each bank's deposits are insured separately up to ₹5 lakhs. In this case, the customer's ₹8 lakh deposit will be insured only up to ₹5 lakhs; the remaining ₹3 lakhs will not be covered. The trap here is that candidates may assume full coverage of the deposit amount or confuse the limit with other banking thresholds. Therefore, answer is B.

Question 20

A bank customer avails a home loan of ₹25 lakhs at 7.5% per annum with a tenure of 20 years under a floating rate structure. The loan agreement includes a clause allowing the bank to adjust the interest rate based on changes in the RBI's Repo Rate. Which RBI regulation specifically governs the transparency and disclosure requirements for such floating rate loans?

Accepted Answer

RBI's Master Direction on Lending – Floating Rate Loans (issued under Section 45-ZA of the Banking Regulation Act, 1949, and Section 35A of the RBI Act, 1934) governs the transparency and disclosure requirements for floating rate loans. This Master Direction mandates that banks must clearly disclose the benchmark rate (e.g., Repo Rate), the spread, the reset frequency, and the mechanism for interest rate adjustment to the borrower before loan disbursement. The regulation also specifies that banks must link floating rate loans to an external benchmark (such as RBI's Repo Rate) rather than internal benchmarks, to ensure transparency and prevent arbitrary rate hikes. The trap here is confusing this with other RBI directions on lending (e.g., Priority Sector Lending, Know Your Customer guidelines) or with general Banking Regulation Act provisions. Therefore, answer is A.

IBPS RRB PO Deposits & Loans

Deposits & Loans— Rules & Concept

Key Points to Remember

Exam-Specific Tips

Deposits & Loans — Practice Questions

60-Second Revision — Deposits & Loans