ZE
ZESTEXAM

SSC MTS Basic Trig Ratios

Study Material — 11 PYQs (2021–2021) · Concept Notes · Shortcuts

SSC MTS Basic Trig Ratios is a frequently tested subtopic — 11 previous year questions from 2021–2021 papers are included below with concept notes, key rules and shortcut tricks.

11 PYQs
2021–2021
0 Practice
MCQs
10 Key Points
to remember
Free
no login needed
Take Free Mock →Full Practice Set
Also for:CGLCHSLGDCPO
PYQs
11
Practice
0
Key Points
10
Access
Free
Previous Year Questions

SSC MTS Basic Trig Ratios — Past Exam Questions

11 questions from actual SSC MTS papers · all shown free · click option to reveal solution

Exam Q 12021Previous Year Pattern

In a right triangle, sin θ = 4/5. What is the value of cot θ?

Exam Q 22021Previous Year Pattern

In a right triangle, if the opposite side is 8 cm and the hypotenuse is 17 cm, find sin θ.

Exam Q 32021Previous Year Pattern

If tan θ = 1, what is the value of θ (in degrees)?

Exam Q 42021Previous Year Pattern

If sin θ = 3/5 and θ is an acute angle, find the value of cos θ.

Exam Q 52021Previous Year Pattern

In a right-angled triangle, if tan θ = 5/12, what is the value of sec θ?

Exam Q 62021Previous Year Pattern

If cos θ = 7/25, find tan θ (where θ is acute).

Exam Q 72021Previous Year Pattern

If sin θ = 4/√97 and cos θ = 9/√97, find the value of cot θ.

Exam Q 82021Previous Year Pattern

If cos θ = 7/25 and θ is acute, what is sin θ + tan θ?

Exam Q 92021Previous Year Pattern

If sin θ = 3/5 and θ is an acute angle, find the value of tan θ.

Exam Q 102021Previous Year Pattern

In a right-angled triangle, if tan A = 5/12, find the value of sec A.

Exam Q 112021Previous Year Pattern

If 3 sin θ - 4 cos θ = 0, find the value of tan θ (where θ is acute).

Concept Notes

Basic Trig Ratios— Rules & Concept

Core ConceptRead this first — the foundation of the topic
Core Concept

In a right triangle, trigonometric ratios connect an angle with the ratios of two sides. For any angle θ (theta), there are six basic ratios: sine, cosine, tangent, cosecant, secant, and cotangent

Key Definitions

Consider a right triangle with angle θ. The three sides are: Hypotenuse (longest side, opposite to 90°), Opposite (side facing angle θ), and Adjacent (side next to angle θ)

Basic Ratios

sin θ = Opposite/Hypotenuse cos θ = Adjacent/Hypotenuse tan θ = Opposite/Adjacent cosec θ = 1/sin θ = Hypotenuse/Opposite sec θ = 1/cos θ = Hypotenuse/Adjacent cot θ = 1/tan θ = Adjacent/Opposite Fundamental Identity: sin²θ + cos²θ = 1 (Most important for SSC CGL) Other Identities: 1 + tan²θ = sec²θ and 1 + cot²θ = cosec²θ

Exam PatternsWhat examiners ask — read before attempting PYQs

SSC CGL asks direct ratio calculations, value finding, and identity-based problems. Questions often involve standard angles (0°, 30°, 45°, 60°, 90°) and basic identities. Shortcut #1 - Standard Angle Values: For 0°, 30°, 45°, 60°, 90°: sin values: 0, 1/2, 1/√2, √3/2, 1 cos values: 1, √3/2, 1/√2, 1/2, 0 tan values: 0, 1/√3, 1, √3, undefined Memory trick: sin 30° = 1/2, sin 60° = √3/2 (opposite values for cos)

Worked ExampleSolve this step-by-step before moving on
1
Step 1

Use identity sin²θ + cos²θ = 1

2
Step 2

(3/5)² + cos²θ = 1

3
Step 3

9/25 + cos²θ = 1

4
Step 4

cos²θ = 1 - 9/25 = 16/25

5
Step 5

cos θ = 4/5 (taking positive value)

6
Step 6

tan θ = sin θ/cos θ = (3/5)/(4/5) = 3/4 Answer: cos θ = 4/5, tan θ = 3/4 Shortcut #2 - Quick Identity Check: Whenever given one ratio, immediately use sin²θ + cos²θ = 1 to find others. This saves calculation time in exams. Worked Example 2: Simplify (sin θ × cosec θ) + (cos θ × sec θ)

1
Step 1

Replace cosec θ = 1/sin θ and sec θ = 1/cos θ

2
Step 2

(sin θ × 1/sin θ) + (cos θ × 1/cos θ)

3
Step 3

1 + 1 = 2 Answer: 2 Shortcut #3 - Reciprocal Recognition: Instantly recognize reciprocal pairs: sin-cosec, cos-sec, tan-cot. Their product always equals 1.

Exam TrapsCommon mistakes students make — avoid these

#1: Students often confuse opposite and adjacent sides when angle position changes. Always identify the angle first, then mark opposite and adjacent accordingly. Many students lose marks by mixing up sin and cos definitions when the triangle orientation changes.

Practice identifying sides relative to the given angle, not the triangle's position on paper. Practical Exam Tip: In multiple choice questions, if you get values like sin θ = 4/3 or cos θ = 6/5, immediately mark it wrong. Sine and cosine values cannot exceed 1. This elimination technique saves precious exam time.

Key Points to Remember

  • sin θ = Opposite/Hypotenuse, cos θ = Adjacent/Hypotenuse, tan θ = Opposite/Adjacent
  • cosec θ, sec θ, cot θ are reciprocals of sin θ, cos θ, tan θ respectively
  • Fundamental identity: sin²θ + cos²θ = 1 (appears in 80% of trigonometry questions)
  • Standard angles: sin 30° = 1/2, sin 45° = 1/√2, sin 60° = √3/2
  • cos 30° = √3/2, cos 45° = 1/√2, cos 60° = 1/2
  • tan 30° = 1/√3, tan 45° = 1, tan 60° = √3
  • Quick check: sin θ and cos θ values must always be between -1 and 1
  • Identity shortcut: 1 + tan²θ = sec²θ and 1 + cot²θ = cosec²θ
  • Reciprocal product rule: sin θ × cosec θ = 1, cos θ × sec θ = 1, tan θ × cot θ = 1
  • Always identify opposite and adjacent sides relative to the given angle, not triangle position

Exam-Specific Tips

  • sin 30° = 1/2 and cos 60° = 1/2 (complementary angles have equal values)
  • sin 45° = cos 45° = 1/√2 = √2/2
  • tan 45° = 1 (only standard angle where tangent equals 1)
  • sin 0° = 0, cos 0° = 1, tan 0° = 0
  • sin 90° = 1, cos 90° = 0, tan 90° is undefined
  • √2 ≈ 1.414 and √3 ≈ 1.732 for decimal calculations
  • In any right triangle, hypotenuse is always the longest side
  • Maximum value of sin θ or cos θ is 1, minimum value is -1

60-Second Revision — Basic Trig Ratios

  • Remember: sin²θ + cos²θ = 1 is the most tested identity
  • Formula: Standard angles - sin 30°=1/2, sin 60°=√3/2, sin 45°=1/√2
  • Trap: Never accept sin θ or cos θ values greater than 1 in any answer choice
  • Quick tip: cosec, sec, cot are just reciprocals - flip the fraction
  • Check: Opposite side is always relative to the given angle, not triangle orientation
  • Speed trick: Use complementary angle property - sin θ = cos(90°-θ)
  • Final check: In MCQs, eliminate impossible ratio values first
Heights & Distances→
Studied the notes? Now test yourself
See how Basic Trig Ratios appears in the real SSC MTS paper
Full timed mock · Instant All-India percentile · Free
Start Free Mock →Practice Panel
✓ Free forever for basic prep✓ No app download✓ Real exam-pattern questions✓ 12,000+ aspirants
Test Basic Trig Ratios under exam conditions
Free SSC MTS mock · instant rank · no login
Free Mock →